Section 3: Requirements
ADDITIONAL ITEMS REQUIRED FOR INSTALLATION
Air Compressor
An adequate air supply will allow you to fully utilize the Scorpion System. We recommend using an air compressor capable of supplying 17.5 cfm or more @ 90 PSI. A typical compressor will be a two-stage, 7.5 hp 220 volt compressor with an 80 gallon storage tank. These are available from many suppliers. Many of our applicators work in the automotive industry and already have this.
Misc Items
- 1 Roll of 18" Masking Paper and 1 Roll of 36" Masking Paper and/or 1 Roll of 8' X 100' Clear 4 Mil. Plastic
- 1 Roll of High quality 2" Masking Tape and 1 Roll of High quality ¾" Masking Tape
- 1 Variable Speed ½ Inch Drill
- ⅜ Air Supply Hose
- 2 Pair of Rubber/Latex Gloves, Painters Suit, Eyewear
- Various Small Tools Such as: Pliers, Screwdriver, Vice grips, etc.