Online Training Module

Return to

Section 6: Techniques



Rubber Crumb can be added to XO2 to both add an aggressive texture as well as extend the square footage of an application. 

To use, mix a standard small, medium or large batch of XO2 for 30 seconds.  Next add the appropriate amount of Rubber Crumb.  Mix for another 30 seconds until all components are uniform.  Do not over mix.  Mixing for more than 1 minute can drastically reduce pot life. 

Spray Rubber Load at 40-45 PSI and use ΒΌ to 1/3 trigger to get a uniform finish.  This application does not require a texture pass.

Refer to your shop manual for mixing ratios.