TECH CORNER: 8001 Adhesion Promoter

A Primer on 8001 Adhesion Promoter We recently have had a few applicators call with questions on 8001 Adhesion Promoter. Here are a few tips on using 8001 to make sure that you don’t have any installation failures due to 8001 issues. – 8001 Adhesion Promoter...

DIY Window Film How-To: Sun Strip Install

Many of us do-it-yourself types try at least once to tint our own windows.  Why not?  You go in saving money and it is pretty simple to do.  Well side windows are super simple and using the rear window kit makes tinting the back of a car a lot simpler by doing it in...

TECH CORNER: XO2 Accelerator

It’s That Time of Year Again Now that we are coming into the colder winter weather, keep in mind that the Accelerator will increase cure time by up to 60% in cooler weather if used at full strength. At maximum strength use ½ Cup per large batch. You do not have to use...

TECH CORNER: XO2 B

The Importance of Agitation We still get calls occasionally from folks that have installed a bed liner that isn’t curing as fast as it normally does. In most cases, this is because they haven’t agitated the XO2 “B” material before they poured it off. The XO2 “B” is...

TECH CORNER: XO2 A

Temperature and Storage XO2 “A” component: This is the base polyurethane for the XO2 coating. It needs to be stored at moderate temperatures (60-80° F). If stored at colder temperatures, the XO2 will be hard to maintain texture. The material will have a tendency to...

TECH CORNER: XO2 C

Textures and Vertical Hang This 3rd part of the XO2 system is used to get the XO2 to texture and for vertical hang. This is the only component in the XO2 system that the ratio can be altered without affecting the physical properties of the finished product. We are...